Humidity and temperature climate chamber

Temperature and humidity test chamber 1SUS#304stainless steel 2PU wheel 3Digital electronics controller 4PID+S.S.R system

Temperature and humidity test chamber

Usage

Temperature and humidity test chamber test the fiber, LCD crystal, inductor, PCB, batteries, computers, mobile phones and otherproducts whether can suit high temperature resistance, low temperature and moisture. 

Packaging and delivery

Packaging: wooden case meets the international standard

Delivery: in 15-20 working days after order confirmation

Specification

1. Humidity range: 20%RH-98%RH2. Circulation: Siroco Fan3. Heating: High Speed Heater

4. Dehumidifying: ADP critical dewpoint cooling

Model			YTH-080	YTH-150	YTH-225
Internal Dim.(mm) W×H×D			400×500×400	500×600×500	500×750×600
External Dim.(mm) W×H×D			900×900×1500	950×1500×1050	950×1650×1150
Temperature Range			-73°C -60°C, -40°C, -20°C, 0°C~+150°C, +180°C
Humidity Range			20%RH ~98%RH
Performance	Temp.&Humi.Constancy		±0.2°C ±2.5%RH
	Temp.&Humi.Uniformity		±0.5°C;±4.0%RH
	Indication resolution		0.01°C;0.01%RH
	Heat-at Time(20°C-HT)	°C	100   150	100   150	100   150
		min	30   40	30   40	30     45
	Pull-down Time(20°C-LT)	°C	0 -20 -40 -60 -70	0 -20 -40 -60 -70	0 -20 -40 -60 -70
		min	25 40 50 80 90	25 40 50 80 90	25 40 50 80 90
Material	Exterior		Stainless steel plate+Powder Coated
	Interior		SUS#304 stainless steel plate
	Insulation		PU & Fiberglass wool
System	Circulation		Siroco fan
	Heating		SUS#304 stainless steel high-speed heater
	Humidifying		Surface evaporating system
	Cooling		Airtight compressor+vaporator fins+air-cooling condenser
	Dehumidifying		ADP Critical dewpoint cooling/dehumidifying method
	Controller		Digital electronic indicatrs+S.S.R.With PIDautomatic calculation capabilty
Other Components			Vacuum glass inspectin window,cable port( 60mm),control status indicator lights,chamberlamp,experment separation shelves (freely adjustable 2pcs)
Safety Devices			Ocerheating prevention circuit-breaker,compressor overload protection,control system overload protection,humidifying system overheading drying out prevention,breakdown indicator light
Power Source(K.W.)			AC 1Ψ 220V;3Ψ380V 60/50Hz
			3.0 4.0 6.0 6.0 6.0	2.5 4.0 5.0 8.0 9.0	2.5 4.0 5.0 8.0 9.0

Feature

1 Loop configuration: Maximum 9999 cycles, can be divided into 5 independent sub-loops. 

2 Equipped with 10 years memory device in case of power failure. There are 3 modes-hot, cold and stop for restarting the machine. 

3 Can display temperature, humidity, current program and transferred into curves immediately. 

4 Controller uses the imported LED display screen, can display measured values and setting time.

If you are interested in the item, pls contact me soon.